MMP-A MICROPHONE PREAMP (MMP-A)

Output connector: XLR-3M. Pin 1: shield, Pin 2: signal + phase, Pin 3: - phase

Low-cut frequency, -3 dB: 8 Hz

Noise with shorted input A-weighted: 0.5 µV

Output voltage, RMS: > 5 V

Output voltage, peak: > 16 V

Type of electronic circuit: Active

THD@1VRMS, 1kHz: < 0.2 %

Dynamic range: 138 dB

Switchable attenuator, filters etc.: 0 dB, -20 dB

Output impedance: < 200 ohm

Cable drive capability: 100 m (328 ft)

Output balance principle: Impedance balancing with Active Drive

Common mode rejection ratio (CMRR): > 60 dB

Power supply (for full performance): 48 V Phantom power (± 4 V)

Current consumption: 2.8 mA

Color: Matte black

Weight: 140 g (4.9 oz)

Diameter: 19 mm (0.75 in)

Length: 147 mm (5.8 in)

Temperature range: -40 °C to 45 °C (-40 °F to 113 °F)

Relative humidity (RH): Up to 90 %