The BeachTek DXA6A is a two channel, transformer balanced XLR adapter with built-in 48 volt phantom power supplies. This adapter is designed to easily attach two professional, balanced microphones or wireless systems to the Sony VX and FX series of camcorders. The Beachtek DXA6A gives you all the benefits of using balanced audio devices for clean audio as well as control over the signal levels to ensure the best possible sound recording.

The Beachtek DXA6A is very easy to set up and…

The Beachtek DXA-4 (DXA-4P) Dual XLR Input to 1/8" Stereo Mini Output Adapter allows you to attach two balanced XLR audio devices to your camcorder. Each input signal is sent to a MIC/LINE switch to allow you to set the proper level, then to an audio control to adjust attenuation. The balanced input signal is then converted to an unbalanced output through an impedance matching transformer. Finally, the output signal is sent through an attached shielded cable terminating in a stereo mini…

The BeachTek DXA-5Da is a two-channel, transformer balanced XLR adapter for attaching external microphones and other audio gear to any DSLR camera that has a built-in mic jack. It can also be used with any camcorder or other audio recording device that has a mic jack. The The BeachTek DXA-5Da uses high quality balancing transformers, which are completely noise free for superb audio. The The BeachTek DXA-5Da is very easy to set up and use. It allows you to connect a wide…

The BeachTek DXA-2s is a two channel, transformer balanced XLR adapter for today’s small, compact camcorders. This adapter is designed to easily attach balanced or unbalanced type microphones to any camcorder with a MIC jack. The DXA-2s gives you all the benefits of using balanced audio devices for clean audio as well as control over the signal levels to ensure the best possible sound recording.

The Beachtek DXA2S is very easy to set up and use. Its rugged construction ensures years of…

The Beyerdynamic Microphone Stand with Boom is a height adjustable tripod microphone stand with telescoping boom. The stand features a scratch resistant finish and is adjustable in height between 35 to 63".

The COMTEK Mini-Mite 216 is a 1/2 wave antenna for use with the BST-25/216 and M-216 Option 7 transmitters. It is ideal for use on sound carts for location sound operation and is a more convenient alternative to the traditional Phase Right Antenna. Because the Comtek Mini-Mite 216 utilizes 1/2 wave technology, it does not need to have an antenna ground and can be mounted to metallic or non metallic sound carts using a standard mic stand mounting flange. The total length of the wire whip…

Recording studios, broadcast facilities, sound reinforcement engineers, musicians, and sound contractors alike will find that the straightforward design and versatile signal control options make the DBX 3231L Dual 1/3 Octave Graphic Equalizer a powerful audio tool.

DBX 3231L Graphic Equalizer Features

• 31 ISO standard center 1/3 octave constant Q frequency bands
• Variable high pass and switchable low pass 12dB/octave filters
• Electronically balanced…

The Denecke PS-1 48v Phantom Power Supply feeds a microphone signal to DAT recorders, radio mics, tape machines and mixers. Compact, rugged, lightweight and very low noise. Automatic power on and off. LED indicator blinks for turn on and off, and will remain on to indicate low battery. Internal -15dB pad switch. Operates from a single 9V alkaline battery.

The Denecke Dcode SB-T Time Code and Video Sync Generator reads, generates and jams to all the standard frame rates including 23.976 for High Definition Video. The outputs include Time Code and Video Sync in PAL and NTSC, as well as Trilevel for HD shoots. The Temperature Compensated Crystal Oscillator (TCXO) ensures low drift. High stability and ease of use makes it a welcome addition to any Hi Def or Standard Def shoot!

Denecke Dcode SB-T Time Code and Video Sync Generator…

The IDX JL2 Plus 2-Up Fast Charger is a sequential 2 Channel battery charger for Lithium Ion and Nickel Cadmium NP batteries in any combination, with a 60W DC 13.8v XLR power supply. Please note CA4XLR power supply cable is now included.

IDX JL2 Plus 2-Up Fast Charger for NP-type Batteries Features

• Quick charge current : All IDX NP-L and Endura type Li-ion batteries: 2.3A. All IDX Ni-Cd batteries: 1.9A.
• Input Voltage : AC100-240V 50/60Hz
• Dimensions : 5.94(W…

JuicedLink JL-DT454 DSLR Camera Microphone Preamplifier Features

• 4 microphone channels (2 XLR, 2 unbalanced)
• Low-noise preamplifiers
• 30dB low-noise max gain (single-ended, stereo)
• Headphone Amplifier
• Playback Monitor
• 48V Phantom, plus 12V power saving mode

Meters

• 4 segment LED (each right/left)
• 2 sensitivity settings; adjustable
• Meters valuable with the new 5D 2.0.4 firmware, which does not show…

We rent both cabled and uncabled K tek boom poles in 6', 9' and 11' lengths.

Considered the little brother to the RF MultiMax!, the PSC RF Multidual Wideband Antenna Splitter offers the same unmatched flexibility for antenna splitting in a one space rack mount design. The ​PSC RF Multi Dual 1x8 offers two sections of separate, active 1 x 8 splitters that can be used for splitting antenna feeds for wireless applications. Again, when used in various combinations, these sections and the combined BNC connectors, allow for some very flexible RF routing solutions…

The PSC RF Multimax Wideband Antenna Splitter offers unmatched flexibility for antenna splitting to wireless receivers.The PSC RF Multimax Wideband Antenna Splitter is built with six independent splitters that can be connected in a host of different ways. First, it contains two, 2 x 4 passive splitter/combiners that can be used to either combine up to four antennas or split one antenna four ways. Secondly, the PSC RF MultiMax contains four, separate, active 1 x…

The Professional Sound Corporation Universal Microphone Power Supply is capable of powering both 12 volt "T" (AB) microphones and 48PH phantom powered microphones. Included in the design is a three-way switchable high pass filter (0dB, -6dB, -12dB @100Hz) and a three-way switchable pad (0dB, -10dB, -20dB). A built in LED indicates battery condition upon power up ensuring trouble free field recording. The PSC Universal Microphone Power Supply contains an internal "T" power phase switch,…

PSC Universal Shock Mounts were designed to provide stable and noise free handling for a wide variety of microphones. Featuring a compact, concise design, they are constructed of lightweight aircraft aluminum and have a non-reflective black anodized finish. The two custom suspension bands provide a high degree of isolation from handling noise. The shock mounts can hold microphones with diameters up to 1.25" (32mm) ensuring that nearly any microphone may be utilized. Industry standard 3/8" x…

The QSC K8 Active Loudspeaker is quite simply the new standard in lightweight powered loudspeaker systems. Under the direction of Pat Quilter, QSC's team of amplifier engineers have created a new standard in Class D power modules unparalleled in the industry. Next, breaking from the traditional loudspeaker paradigm, every model is fitted with the identical 1.75" HF device (fullrange models) and woofers of the same high quality for unparalleled performance, regardless of speaker size.…

The QSC KSub Dual 12 inch Active Subwoofer is a bandpass design, constructed of premium birch and includes high-quality, low-noise casters. The subwoofer features a threaded pole receptacle for a positive, wobble free connection to a threaded speaker pole (included). Daily rental rate is $50 when rented with other speakers.

Remote gain control capability is offered via a potentiometer (not included) connected to the on-board Euroblock connector. In an installed application,…

The QSC K10 2-way 10 inch Active Loudspeaker is quite simply The New Standard in lightweight powered loudspeaker systems. Under the direction of Pat Quilter, QSC's team of amplifier engineers have created a new standard in Class D power modules unparalleled in the industry. Next, breaking from the traditional loudspeaker paradigm, every model is fitted with the identical 1.75" HF device (fullrange models) and woofers of the same high quality for unparalleled performance, regardless…

The QSC K12 2-way 12 inch Active Loudspeaker is quite simply the new standard in lightweight powered loudspeaker systems. Under the direction of Pat Quilter, QSC's team of amplifier engineers have created a new standard in Class D power modules unparalleled in the industry. Next, breaking from the traditional loudspeaker paradigm, every model is fitted with the identical 1.75" HF device (fullrange models) and woofers of the same high quality for unparalleled performance, regardless of…

Using only 48V phantom power, the Radial Engineering J48 is an active direct box that produces an exceptionally linear response that extends from 20Hz up to well above 40kHz. Low distortion of all types is achieved via a unique digital switching power supply that raises the internal operating rail voltage for added headroom and improved signal handling.

The Radial Engineering J48 is both feature-rich for studio and made tough to handle the road. This includes a -15dB input…

The Rane AD 22d is a fully balanced two Input, two Output audio alignment Delay providing a range of 1.50 to 999.99 milliseconds on each Output. The Delay of each Output is independently adjustable in 10 microsecond and 1 millisecond increments. 24-bit audio converters provide excellent sound quality.

Each Output has two nonvolatile Memories (no batteries required), A and B, for easy access to previously stored Delay values. Remote Recall screw terminals on the rear accept external…

The RFVenue RF Spotlight Antenna is an innovative, patent pending UHF antenna design that excels in applications where wireless microphones will be used in a limited area. With one or more RF Spotlight units in the area of use, the user can create a local RF field- similar in effect to a soft spotlight in a dark theater. By intentionally designing the unit for reduced signal sensitivity yet a uniform, omnidirectional pickup pattern, the RF Spotlight can be within very close range…

Unlike ordinary “fin” type antennas, the RFVenue Diversity Fin incorporates polarization and space-diversity reception, and does it without noise-generating amplifiers, bias tees, and the usual maze of wires that crews have to deal with. Two feedlines from the Diversity Fin tm antenna easily attach “under the hood” and can be routed to any diversity receiver, or a combiner. The advantage of the Diversity Fin tm antenna is clear: Only one antenna module is needed for dropout reduced reception…

Cyclone, Medium premium windshield system for shotgun and short shotgun mics. Features grey 3D-Tex® material, “multi-suspension” with Lyre® Technology for transparent, category leading wind and shock isolation. Perfect for Sennheiser MKH 416, Schoeps CMIT 5 etc.

Main Benefits:

• Superb acoustic transparency - the open shell structure with no parallel surfaces greatly reduces room-tone effects & provides a clean frequency response;
• Massive wind…

The Rycote Softie Windshield with Softie Shock Mount provides both wind protection and shock mounting for your microphone.

Schoeps MK8 Bi-Directional Figure 8 Capsule Features

The Schoeps MK8 is a true dipole transducer, operating with a single diaphragm. The main axis of its bidirectional pickup lies at right angles to its cylindrical axis, and is marked at 0° and 180° with a red and a black dot respectively. When M/S stereo recordings are made, the 0° axis faces to the left, as viewed from behind the microphone setup. The “8“ engraved on the top of the housing should be aligned on its side so as to…

The Shure FP11 Mic-to-Line Level Amplifier is a portable, in-line amplifier designed to provide up to 84 db of gain so microphone and auxiliary levels can be run at line levels.

The Shure UA870 is an active UHF wireless directional antenna. It features a log periodic dipole array. When compared to an omnidirectional 1/2-wave antenna, the cardioid pattern provided by the UA870 offers enhanced reception of the desired coverage area and greater rejection of RF signals outside the coverage area.

To compensate for coaxial cable signal loss, the UA870 has an on-board amplifier that offers user selectable 3 or 10 dB gain. The gain setting is indicated by two LEDs.…

The Shure SE425 uses a dedicated tweeter and woofer for an accurate and balanced sound. Detachable cable with formable wire enables easy replacement and secure, comfortable fit. Sound Isolating sleeves in multiple sizes provide up to 37 dB of isolation. Evolved from personal monitor technology that's been road-tested by pro musicians, the SE425 is engineered to provide reference quality audio for live performances or personal listening.

Shure SE425-CL Dual Earphone Buds …

The Sony MDR7506 Headphone is a large-diaphragm, foldable headphone designed for professional studio and live/broadcast applications. With its closed-ear design, wide frequency response and rugged design, it is a favorite of broadcast professionals across the globe. The Sony MDR7506 Headphone's 40mm driver unit ensures clear, high-quality sound reproduction and its stereo unimatch plug ensures compatability with 1/4"" and 1/8"" equipment. Reliable and stable signal connection and…

The Sound Devices HX3 is a portable stereo headphone amplifier for critical audio monitoring. This headphone amplifier is ideal for adding headphone feeds for portable and studio applications. The Sound Devices HX3 provides three independent audio feeds from balanced and unbalanced, line level sources. Each headphone output has its own level control, peak LED and 1/4" output connector. With extended bandwidth and high drive capability the ​Sound Devices HX3 can drive headphones of…

The Sound Devices MixPre Microphone Preamp is a studio-quality two-channel, portable, stereo microphone mixer. Its impressive audio performance and comprehensive features, including pan switches, built-in slate microphone, 1 kHz tone oscillator, and headphone monitoring, make it ideal for the front end of any studio or field production system.

Want to buy this used gear when it becomes available? Get on…

The Sound Devices CL-6 Input Expander for 664 Field Production Mixer adds 6 balanced, line-level inputs to the 664. The Input Expander connects to the top or bottom of the 664 (see Mounting the CL-6) and includes 6 full-sized fader controls, PFL control, and highpass control, and dedicated L and R routing buttons for Inputs 7-12. The large, backlit Record and Stop buttons provide convenient access to transport functions. Other features include large, daylight-viewable LED meters (with…

Our Sportcasters Handheld Package with Command Function and IFB includes several Wireless Microphones, Audio Accessories, Communication, and RF Accessories. Here is a complete list of items included in this package.

Wireless Microphones

• 1 Sennheiser SKM5200-IIL Hand Held Trans 470-638 MHz
• 1 Sennheiser EM3732 MarkII Dual Receiver 470-638 MHz
• 1 Sennheiser B5000-2 Command Module for 5200 HH

Audio Accessories

• 1 Sennheiser…

Lectrosonics Venue Wireless Receiver Features

The Venue Receiver system is a modular UHF design that operates with Digital Hybrid Wireless™ transmitters, and a variety of analog transmitters. It consists of a Venue Receiver Master (VRM) and one to six plug-in receiver modules. The VRM includes an antenna multi-coupler, computer communications interface and the mechanical rack mounting for the receiver modules. The VR’s design offers a tremendous degree of flexibility. For…

We rent both cabled and uncabled VDB boom poles in 6', 9' and 11' lengths.

The Whirlwind 1x3 microphone splitter provides one direct and two transformer isolated outputs from a mic level input. Each transformer isolated output features a ground lift switch.

Whirlwind Microphone Splitter Features

• Operating Level: -50dB to +4dB
• Frequency Response: 20Hz-20kHz ±1dB

Boom Op System package Includes

• Shure FP22 (1) - The FP22 is a battery-powered stereo headphone amplifier that provides headphone feeds from any audio input source. It has the unique capability of monitoring mono, stereo and mixed mono and stereo inputs. The FP22 monitors and combines these signals in the headphones without affecting the original signal. Stereo or mono headphone outputs appear on 1/4-inch phone or mini 3.5 mm stereo jacks. The FP22 can drive headphones to very…

Large Double System Bag Package Includes

• Sound Devices 788T with CL-8 (1) - The 788T is a powerful eight input, eight-track digital audio recorder designed for production sound. Building on the success of the proven 7-Series architecture, the 788T offers greatly expanded input and output connectivity while continuing the 7-Series heritage of extensive control in a compact package. The CL-8 is a powerful mixing control surface for Sound Devices 788T recorder. Its large rotary…

Light Double system Bag Package Includes

• Sound Devices 552(1) - The Sound Devices 552 is the most technologically advanced portable audio mixer ever made. Using the best analog and digital technologies, along with advanced mechanical construction, the 552 gives professionals a superb sounding, compact, lightweight and power-efficient mixer that is equally at home in simple run-and-gun applications or in complex multi-input, multi-output production setups.
• Lectrosonics…

Small Bag System package Includes

• Sound Devices 302 (1) - Developed specifically for audio-for-picture applications, the Sound Devices 302 mixer is the perfect tool for production companies and camera operators wanting to take control of their audio.
• Lectrosonics UCR401/UM400a (2) - A tracking front end is built into the Lectrosonics UCR411a receiver to correct for RF interference. The UM400a has optimum modulation, minimum distortion and maximum S/N ratio. All 400…