Call for Availability
800.941.2446
For podium or stylish floor stand applications, the d:dicate™ MMP-F preamplifier series is available in different lengths and gooseneck choices.
Equipped with state-of-the-art preamplifier design and sleek appearance, you can combine this preamplifier with any modular capsule in the d:dicate™ Microphones Series. Excellent radio frequency rejection is obtained through the DPA-designed impedance balancing with active drive.
MMP-F MODULAR ACTIVE BOOM (MMP-F)
Output connector: XLR-3M. Pin 1: shield, Pin 2: signal + phase, Pin 3: - phase
Low-cut frequency, -3 dB: 15 Hz
Noise with shorted input A-weighted: 0.6 µV
Output voltage, RMS: 2.2V
Output voltage, peak: 3.1V
Type of electronic circuit: Active
THD@1VRMS, 1kHz: < 0.2 %
Dynamic range: 131 dB
Output impedance: 100 Ω
Minimum load impedance: 2 kΩ
Cable drive capability: 100 m (328 ft)
Output balance principle: Impedance balancing
Common mode rejection ratio (CMRR): > 40 dB
Power supply (for full performance): 48 V Phantom power (± 4 V)
Current consumption: 3.5 mA
Color: Matte Black
Diameter: 19 mm (0.75 in)
Length: 30cm
Temperature range: -40 °C to 45 °C (-40 °F to 113 °F)
Relative humidity (RH): Up to 90%