Call for Availability
800.941.2446
1 - MMC4011 CARDIOID MICROPHONE CAPSULE (MMC4011)
1 - MMP-ER/ES MODULAR ACTIVE CABLE, XLR (MMP-ER/ES)
1 - CLIP FOR MMP-E PREAMP WITH ACTIVE CABLE (MC4001)
1 - FOAM WINDSCREEN FOR D:DICATE™ MICS WITH ACTIVE CABLE (DUA0041)
Ideal for unobtrusive spot miking, such as hanging or table use, the d:dicate™ 4011E Cardioid Microphone, Active Cable is an ultra-compact cardioid microphone from the modular d:dicate™ Microphones Series. The mic has a length of only 3.5 cm (1.4 in) and a low-key appearance.
The d:dicate™ 4011E Omnidirectional Microphone features an integrated cable solution with either side (4011ES) or rear (4011ER) cable entry. This allows the mic to be hung from the ceiling and create precise and repeatable positions and angles when spot miking orchestra sections or ambience atmospheres.
The microphone capsule
The principal appeal of the MMC4011 Cardioid Microphone Capsule is its directional quality and attention to detail. This mic makes everything sounds like the original. The first-order cardioid pickup pattern provides superb separation between sound sources.
Capable of handling high SPLs without distortion, the microphone is perfectly tailored for close-miking applications; minimizing bleed from other instruments. It is ideal for close-miking of instruments like acoustic guitar, drums or grand piano. With its accessories, it can even be placed, for instance, in the piano frame.
A flat on-axis frequency response and excellent phase response deliver a totally faithful reproduction of the original sound. The off-axis response is similarly smooth so that any leakage is an accurate reflection of the original, though attenuated according to the true first-order cardioid pickup pattern.
A truly flexible range
This mic is part of the flexible d:dicate™ Microphone Series. At any time, and with no tools needed, it is possible to transform the d:dicate™ 4011ER/ES Omnidirectional Microphone into a new configuration. You can combine it with another d:dicate™ or d:facto™ Microphone Capsule or Preamplifier.
The d:dicate™ 4011ES replaces the non-modular legacy 4021 Cardioid Condenser Microphone and the d:dicate™ 4011ER replaces the non-modular legacy 4022 Cardioid Condenser Microphone.
Order numbers: 4006ER, 4006ES.
Features
The product offers the following features
Ultra-compact spot or hanging mic
Close-miking
Great for high sound levels
Accurate sound
Colorless sound
Modular flexibility
d:dicate™ Recording Microphones 4011ER/ES CARDIOID MICROPHONE
Directional pattern: Cardioid
Principle of operation: Pressure gradient
Cartridge type: Pre-polarized condenser
Frequency range: 20 Hz - 20 kHz
Frequency range, ±2 dB, at 30 cm (11.8 in): 40 Hz - 20 kHz
Sensitivity, nominal, ±2 dB at 1 kHz: 10 mV/Pa; -40 dB re. 1 V/Pa
Equivalent noise level, A-weighted: Typ. 18 dB(A) re. 20 µPa (max. 20 dB(A))
Equivalent noise level, ITU-R BS.468-4: Typ. 25 dB
S/N ratio (A-weighted), re. 1 kHz at 1 Pa (94 dB SPL): Typ. 76 dB(A)
Total harmonic distortion (THD): < 1% up to 139 dB SPL peak
Dynamic range: Typ. 121 dB
Max. SPL, peak before clipping: 144 dB
Output impedance: 100 Ω
Minimum load impedance: 2 kΩ
Cable drive capability: 100 m (328 ft)
Output balance principle: Impedance balancing
Common mode rejection ratio (CMRR): > 40 dB
Power supply (for full performance): 48 V Phantom power (± 4 V)
Current consumption: 3.5 mA
Connector: XLR-3M. Pin 1: shield, Pin 2: signal + phase, Pin 3: - phase
Color: Matte black
Weight: 109 g (3.8 oz)
Microphone diameter: 19 mm (0.75 in)
Capsule diameter: 19 mm (0.75 in)
Microphone length: 35 mm (1.38 in)
Maximum output voltage, RMS: 2.2 V
Polarity: +V at pin 2 for positive sound pressure
Temperature range: -40°C to 45°C (-40°F to 113°F)
Relative humidity (RH): Up to 90%
Matching tolerance (frequency response and sensitivity): ±1 dB
Phase deviation for kit: < 10°
DPA d:dicate 4011ER Cardioid Microphone Quick Guide
Download