Skip to main content
Manufacturer
DPA d:dicate 4006ES Omni MIcrophone Side Cable Black
MPN: 4006ES

Call for Availability

800.941.2446

Description

When small, lightweight and barely visible microphones for top-quality recordings are required, the active cable design and clean, transparent sound of our ultra-compact d:dicate™ 4006E Omnidirectional Microphone makes them the perfect choice. The mic features an integrated cable solution with either side (4006ES) or rear (4006ER) cable entry.

These mics are particularly popular as A-B stereo or Decca Tree pairs in concert halls. This mic can be mounted, hung or concealed to create clean, transparent recordings. The SM4000 Suspension Mount is included in the package. This allows the mic to be hung from the ceiling to create precision spot-miking of orchestra sections or ambience atmosphere.

The d:dicate™ 4006E Omnidirectional Microphone is ideal in theatres, opera houses, concert halls or houses of worship and for film applications, both in the studio and on location. These mics are also popular for ambience miking on soundstages, in sports stadiums and other environments where ambient sound needs to be recorded.
 

The microphone capsule

The MMC4006 Omnidirectional Microphone Capsule offers total transparency in any recording situation. It picks up incredible detail and depth of sound. The definition of its high-frequency characteristics across a wide range of instruments is impressive. It offers natural sound, high sensitivity, low noise-floor and extremely linear frequency response from 10 to 20 kHz (±2 dB).

A selection of accessories is available, including acoustic pressure equalizers, a nose cone and interchangeable protection grids. These accessories can acoustically transform the mic. By changing grids, it is possible to gain several unique frequency responses and directional characteristics from the mic. Furthermore, these accessories will not produce any phase shift, noise or distortion that would otherwise be introduced by an electrical filter.
 

A truly flexible range

This mic is part of the flexible d:dicate™ Microphone Series. At any time, and with no tools needed, it is possible to transform the d:dicate™ 4006E Omnidirectional Microphone into a new configuration. You can combine it with another d:dicate™ or d:facto™ Microphone Capsule or Preamplifier.

The d:dicate™ 4006ES replaces the non-modular legacy 4051 Omnidirectional Condenser Microphone and the d:dicate™ 4006ER replaces the non-modular legacy 4052 Omnidirectional Condenser Microphone.

Order numbers: 4006ER, 4006ES.

 

Features

The product offers the following features

Ultra-compact recording mic for hanging applications

Full-bodied sound with minimal visual impact

Legendary recording reference capsule

Modular flexibility

Product Specification

d:dicate™ Recording Microphones 4006ER/ES OMNIDIRECTIONAL MICROPHONE

Directional pattern: Omnidirectional

Principle of operation: Pressure

Cartridge type: Pre-polarized condenser

Frequency range: 10 Hz - 20 kHz

Frequency range, ±2 dB: 20 Hz - 20 kHz

Sensitivity, nominal, ±2 dB at 250 Hz: 40 mV/Pa; -28 dB re. 1 V/Pa

Equivalent noise level, A-weighted: Typ. 15 dB(A) re. 20 µPa (max. 17 dB(A))

Equivalent noise level, ITU-R BS.468-4: Typ. 27 dB (max. 29 dB)

S/N ratio (A-weighted), re. 1 kHz at 1 Pa (94 dB SPL): Typ. 79 dB(A)

Total harmonic distortion (THD): < 1% up to 132 dB SPL peak

Dynamic range: Typ. 117 dB

Max. SPL, peak before clipping: 132 dB

Output impedance: 100 Ω

Minimum load impedance: 2 kΩ

Cable drive capability: 100 m (328 ft)

Output balance principle: Impedance balancing

Common mode rejection ratio (CMRR): > 40 dB

Power supply (for full performance): 48 V Phantom power (± 4 V)

Current consumption: 3.5 mA

Connector: XLR-3M. Pin 1: shield, Pin 2: signal + phase, Pin 3: - phase

Color: Matte black

Weight: 114 g (4 oz)

Microphone diameter: 16 - 19 mm (0.6 - 0.75 in)

Capsule diameter: 16 mm (0.6 in)

Microphone length: 35 mm (1.38 in)

Maximum output voltage, RMS: 2.2 V

Polarity: +V at pin 2 for positive sound pressure

Temperature range: -40°C to 45°C (-40°F to 113°F)

Relative humidity (RH): Up to 90%

Matching tolerance (frequency response and sensitivity): ±0.5 dB

Phase deviation for kit: < 5°

DPA 4006ES d:dicate Omni MIcrophone Guide

Download