Call for Availability
800.941.2446
1- d:fine™
4066 OMNIDIRECTIONAL HEADSET MICROPHONE
1- MINIATURE GRID, SOFT BOOST FOR D:SCREET™ AND D:FINE™
1-MINIATURE GRID, HIGH BOOST FOR D:SCREET™ AND D:FINE™
3 -FOAM WINDSCREEN FOR D:FINE™ SLIM
DPA 4066-B Omnidirectional Miniature Headset Mic, Microdot, (Adapter required) Black.
The d:fine™ 4066 Omnidirectional Headset Microphone offers clean and transparent sound quality with lots of headroom. For years, this has been the chosen headset mic for broadcasters as well as theaters on Broadway and London's West End. This is due to its pristine sound and durability.
The headset construction is unique. You can detach the mic boom from the headset mount to switch it to either the left or right side and then reattach it. Humidity, often an issue in theatrical applications is not a problem. This microphone is constructed with a double-vent protection system and a drop stopper on the microphone boom. Also, the materials inside the mic are water resistant. These design elements make it very difficult for the microphone to fail due to humidity. In addition, the headset surface is matte-gold plated and the ear hooks are covered with a silicone hose.
The microphone’s sensitivity is 6 mV/Pa. This matches the level of the human voice to the general input sensitivity of most wireless transmitters. If powered correctly, the microphone will be able to handle sound pressure levels up to 144 dB SPL before clipping occurs.
Flexible adapter system
The adapters for wireless systems give you flexible, simple and affordable possibilities. You are no longer bound to one wireless system. As circumstances change, you can just switch your adapter, instead of incurring the cost of a whole new microphone. And when you make the switch, you won't hear any loss or change in sound quality.
The d:fine™, d:screet™ and d:vote™ series of miniature microphones work with all leading wireless mic solutions, such as Lectrosonics, Sennheiser, Shure, Sony, Wisycom, Zaxcom and many more. DPA Microphones’ ingenious adapter system is one of a kind in the industry. It protects your investment in fantastic sound for years to come.
Find the adapter that fits your wireless system.
Features
The product offers the following features
Resistant to humidity
Available in three colors and three sizes
Modular adapter system fits most professional wireless systems
Available in three colors and three sizes
Directional pattern Omnidirectional
Principle of operation Pressure
Cartridge type Pre-polarized condenser
Frequency range 20 Hz - 20 kHz
Frequency range, ±2 dB Soft boost grid: 20 Hz - 20 kHz, 3 dB soft boost at 8 - 20 kHz. High boost grid: 20 Hz - 20 kHz, 10 dB boost at 12 kHz
Sensitivity, nominal, ±3 dB at 1 kHz 6 mV/Pa; -44 dB re. 1 V/Pa
Equivalent noise level, A-weighted Typ. 26 dB(A) re. 20 µPa (max. 28 dB(A))
Equivalent noise level, ITU-R BS.468-4 Typ. 38 dB (max. 40 dB)
S/N ratio (A-weighted), re. 1 kHz at 1 Pa (94 dB SPL) 68 dB (A)
Total harmonic distortion (THD) < 1% THD up to 123 dB SPL peak; < 1% THD up to 120 dB SPL RMS sine
Max. SPL, peak before clipping 144 dB
Output impedance 30 - 40 Ω
Cable drive capability Up to 300 m (984 ft)
Power supply (for full performance) For wireless systems: Min. 5 V - max. 50 V through DPA adapter. With DAD6001-BC/DAD6024/DAD4099: 48 V phantom power ±4 V for full performance
Connector MicroDot
Color Black, beige or brown
Weight 14 g (0.5 oz) incl. Cable and MicroDot connector
Microphone diameter 5.4 mm (0.21 in)
Cable length 1.2 m (3.9 ft)
Cable diameter 1.6 mm (0.06 in)
Polarity Positively increasing sound pressure produces positive going voltage on MicroDot pin
Temperature range -40°C to 45°C (-40°F to 113°F)
Relative humidity (RH) Up to 90%
DPA 4066B Omnidirectional Headset Dual Ear
Download