- 4K HDR Video Transmission: Supports up to 4K resolution at 60fps with HDR
- 12G-SDI and HDMI Inputs/Outputs: Versatile connectivity for various devices
- Zero Latency Transmission: Real-time video delivery with no perceptible delay
- 3,000+ ft Line-of-Sight Range: Exceptional wireless range for expansive setups
- Broadcast Mode: Extends range and adds unlimited receiver support
Please contact us for questions:
800.941.2446
About Teradek Transmitter + Receiver
Bolt 4K MAX is the most reliable, highest performance wireless video system we've ever created. Featuring exclusive technology found only in this model, the MAX is designed to be your mission critical wireless workhorse. Transmit up to an 5,000 ft. line of sight with the next-generation Array 4K Panel Antenna. Fixed Frequency Mode locks onto your designated 5GHz channel for enhanced performance in challenging RF environments. A unique antenna design provides a clearer wireless signal with faster reconnection times over long distances.
Transmitter: Video
Video Inputs
1x 12G-SDI SMPTE 2082-1 standard / 75 Ohms (accepts 12G-SDI, 6G-SDI, or 3G-SDI)
1x HDMI Type-A receptacle accepts HDMI 2.0 or HDMI 1.4)Video Outputs
1x Loop out 12G-SDI SMPTE 2082-1 standard / 75 Ohms
SDI Ancillary Data Support
Supports transmitting metadata, timecode and start/stop flags from most camera manufacturers
Color Sampling
SDI: YCbCr 4:2:2, 10-bit/ HDMI: RGB 4:4:4, 8-bit
Input Cross Conversion
Yes, HDMI to SDI
Delay Tx To Rx
<0.001sec
Transmitter: Supported Resolution
Supported Resolutions
4Kp23.98/24/25/29.97/30/50/59.94/60
1080p23.98/24/25/29.97/30/50/59.94/60
1080psf23.98/24/25/29.97/30
1080i50/59.94/60
720p50/59.94/60
480p50 576p59.94/60
480i(NTSC)/576i(PAL)
Transmitter: Video Processing
Video Compression
Visually Lossless
Video Format Conversion Support
Connect an HD source to the Tx and get a 4K signal out of Rx
Connect a 4K source to the Tx, get HD resolution out of Rx
You can also mix & match from a single source:
4K signal into Tx can be 4K output from 1x Rx and HD output from a 2nd Rx
Input/output configurations are controlled directly on units or via Bolt 4K appColor Correction
No
Transmitter: Audio Processing
Audio Format
48kHz 24-bit PCM
Transmitter: Inputs
Audio Input
Embedded SDI/HDMI Audio Input (2 Channel)
Transmitter: Interfaces
Configuration Interfaces
OSD with Menu, Joystick Navigation
Switches
On/Off Switch
USB Interface Functionality
Upgrade via Micro-USB
Transmitter: Network
Antennas
4x External 2dBi RP-SMA antennas (included)
Wireless
Non-DFS Frequencies:
5.190 - 5.230GHz and 5.755 - 5.795GHz
DFS Frequencies:
5.270 - 5.670GHzChannel Bandwidth
14x 40MHz wide channels
RF Channel Selection
Auto, Manual
Manual available for non-DFS ChannelsEncryption
AES-256, RSA-1024 key exchange
RF Power
19 dbm EIRP (4 external 2dBi antennas) (<80mW transmit power)
Range
Up to 1500', line of sight
Unicast Multicast
Can connect one Transmitter to up to 6 Receivers
Noise Rejection
Can coexist with Wi-Fi and 5GHz cordless phones
Can operate up to 6 sets in same location
Transmitter: Power
Power Input
2-Pin Circular locking Connector 7-28V DC
Battery
No
Nominal Power Consumption
20 Watts
Receiver: Video
Video Outputs
2x 12G-SDI SMPTE 2082-1 standard / 75 Ohms (accepts 12G-SDI, 6G-SDI, or 3G-SDI)
1x HDMI Type-A receptacle accepts HDMI 2.0 or HDMI 1.4)SDI Ancillary Data Support
Supports transmitting metadata, timecode and start/stop flags from most camera manufacturers
Color Sampling
SDI: YCbCr 4:2:2, 10-bit/ HDMI: RGB 4:4:4, 8-bit
Input Cross Conversion
Yes, HDMI to SDI
Delay Tx To Rx
<0.001sec
Receiver: Supported Resolution
Supported Resolutions
4Kp23.98/24/25/29.97/30/50/59.94/60
1080p23.98/24/25/29.97/30/50/59.94/60
1080psf23.98/24/25/29.97/30
1080i50/59.94/60
720p50/59.94/60
480p50 576p59.94/60
480i(NTSC)/576i(PAL)
Receiver: Video Processing
Video Compression
Visually Lossless
Video Format Conversion Support
Connect an HD source to the Tx and get a 4K signal out of Rx
Connect a 4K source to the Tx, get HD resolution out of Rx
You can also mix & match from a single source:
4K signal into Tx can be 4K output from 1x Rx and HD output from a 2nd Rx
Input/output configurations are controlled directly on units or via Bolt 4K appColor Correction
17x17x17 3D LUT (supports 10-bit color)
Receiver: Audio Processing
Audio Format
48kHz 24-bit PCM
Receiver: Outputs
Audio Output
Embedded SDI/HDMI Audio Output (2 Channel)
Receiver: Interfaces
Configuration Interfaces
OSD with Menu, Joystick Navigation
Switches
On/Off Switch
USB Interface Functionality
Upgrade via Micro-USB
Receiver: Network
Antennas
5 External 2 dBi antennas (included) or optional Array Panel Antenna
Wireless
Non-DFS Frequencies:
5.190 - 5.230GHz and 5.755 - 5.795GHz
DFS Frequencies:
5.270 - 5.670GHzChannel Bandwidth
14x 40MHz wide channels
RF Channel Selection
Auto, Manual
Manual available for non-DFS ChannelsEncryption
AES-256, RSA-1024 key exchange
RF Power
17 dbm EIRP (one external 2dBi antenna) (<51mW transmit power)
Range
Up to 1500', line of sight
Unicast Multicast
Can connect one Transmitter to up to 6 Receivers
Noise Rejection
Can coexist with Wi-Fi and 5GHz cordless phones
Can operate up to 6 sets in same location
Receiver: Power
Power Input
2-Pin Circular locking Connector 6-28 VDC
Battery
No
Nominal Power Consumption
18 Watts
General
Operating Temperature
0 to 40 deg. C (32 to 104 deg. F)
Construction
Milled Aluminum(Chassis) and regulation-compliant PCB
Mount
Gold Mount
Dimensions
Transmitter: 132 x 91 x 27mm (5.20 x 3.58 x 1.06")
Receiver: 112 x 139 x 27mm (4.41 x 5.47 x 1.06")Weight
Bolt 4K Tx without antennas (no battery plates): 360g (12.70 oz)
Bolt 4K Tx with 4x antennas (no battery plates): 408g (14.39 oz)
Bolt 4K Rx without antennas (no battery plates): 440g (15.52 oz)
Bolt 4K Rx with 5x antennas (no battery plates): 496g (17.50oz)
Gold-Mount battery plate set (male+female): 172g (6.07 oz)