- Fully Tuneable from 2,800 K - 10,000 K
- Vibrant Color Selection (RGB+W Color Gamut)
- High Color Rendering
- Low Power Consumption (420 W Nominal)
- Tremendous Output - Brighter than 2kW Tungsten Soft Light
Please contact us for questions:
800.941.2446
ARRI continues to broaden their LED line and reaffirm their commitment to accurate color rendering with the introduction of the SkyPanel S60-C LED Softlight.
Supported by a steel yoke, the panel surface area measures 25.4 x 11.8" and employs interchangeable thermoplastic diffusers that range from Lite to Heavy to soften the light and wrap its output around your subject. The SkyPanel outputs the equivalent of a 2,000W tungsten soft light while drawing a maximum of only 450W.
Using technology originally designed for the L7-C Fresnel, the SkyPanel S60-C is fully color "tuneable" allowing output of a warm 2,800K to icy blue 10,000K light and also uses the full RGB+W color gamut with hue and saturation control for fine adjustments. Full Minusgreen to Full Plusgreen is also possible, so if you're lighting for blue or greenscreen, you can simply dial your color chosen in. This wide degree of control is responsible for a very high CRI of 95 and a rating of 90 with the newer TLCI standard. All of these functions as well as 0-100% dimming can be adjusted locally with the SkyPanel's onboard controller or remotely via DMX or a LAN
Mark Sacco presents the ARRI SkyPanel S-360 and S-60 on why we brought these lights into our sales and rental line up.
The SkyPanel S60-C can be used worldwide, thanks to its included 90-250 VAC power supply but it can also use optional 23-36 VDC batteries when mains power is unavailable. Besides the power supply, the light comes with a Junior (1-1/8") pin and a standard diffuser. This version of the light has a manual yoke and comes with an Edison power cord.
Arri SkyPanel Features:
- Fully Dimmable from 0 - 100%
- Lightweight and Compact
- Beautiful Soft Beam of Light
- Interchangeable Diffusion Panels
- Wide Range of Accessories Available
- Thin Profile
- On-Board Battery Connection (23 - 36V DC)
- Onboard Simple Control Panel
- Onboard DMX In and Out
- RDM Implementation
- EtherCon port for network connectivity
- Fan Mode Selection
- External Lightweight PSU
- powerCON TRUE1 Power Connector
Photometrics:
At 16.4' (5.0m)
At 3,200K
With Standard Diffusion: 393 lux/ 37 fc
With Lite Diffusion: 462 lux/ 43 fc
With Heavy Diffusion: 320 lux/ 30 fc
With Intensifier: 511 lux/ 47 fc
At 5,600K
With Standard Diffusion: 416 lux/ 39 fc
With Lite Diffusion: 489 lux/ 45 fc
With Heavy Diffusion: 338 lux/ 31 fc
With Intensifier: 541 lux/ 50 fc
Lamphead | S60-C |
Optical System | Soft Diffusion Panel |
Light Aperture | 645 x 300 mm / (25.4 x 11.8 inches) |
Beam Angle | 115º (Half Peak Angle) |
Weight | Manual Version: 11.7 kg (25.8 lbs) Pole Op Version: 12.8 kg (28.1 lbs) |
Handling | Steel Yoke, High Strength Tilt Lock Pole Operation Option (Pan & Tilt) |
Mounting | 28 mm Spigot (Junior Pin) |
Tilt Angle | +/- 90º |
Lamphead Voltage Input | 48 V DC |
Power Consumption | 420 W Nominal, 450 W Maximum |
Lamphead Power Connection | Male 3-Pin XLR - 15 amp (Pin 1: Negative / Pin 2: Positive) |
Battery Connector | Male 4-Pin XLR - 10 Amp (Pin 1: Negative / Pin 4: Positive) |
Battery DC Voltage Range | 23 - 36 V DC |
Battery Mode Light Output | 50% of Total Output |
White Light | 2800K - 10000K Continuously Variable Correlated Color Temperature |
Colored Light | Full RBG+W Color Gamut with Hue and Saturation Control |
Color Temperature Tolerance | +/-100K (nominal), +/-1/8 Green-Magenta (nominal) |
Color Rendition | CRI Average > 95 TLCI Average > 90 |
Green-Magenta Adjustment | Continuously Adjustable (Full Minusgreen to Full Plusgreen) |
Dimming | 0 - 100% Continuous |
Control | On-Board Controller, 5-Pin DMX In and Through, EtherCon LAN Network Connectivity, USB-A |
Remote Device Management (RDM*) | DMX Setup, Hour Counter and Standard RDM Commands |
Software Interface | Ethernet: DMX Setup, Fixture Status and Firmware Upgrade Through PC, Mac USB-A: Software upgrade via flash drive |
Housing Color | Blue/Silver, Black |
Ambient Temperature Operation | -20 - 45ºC (-4 - 113ºF) |
Protection Class | IP 20 |
Estimated LED Lifetime (L70) | 50,000 hours |
Estimated Color Shift Over Liftetime | +/- 5% K |
Certifications | CE, FCC; GS, cNRTL, CB |
Power Supply Unit | S60 PSU |
Power Supply Input Range | 110 - 240 V AC, 50/60 Hz |
Power Supply Output Rnage | 48 V DC |
Power Input Connection | powerCON TRUE1 (Bare Ends / Schuko / Edison Cables Available) |
Power Output Connection | Female 3-Pin XLR - 10 Amp (Pin 1: Negative / Pin 2: Positive) powerCON TRUE1 (mains power through) |
Weight | 3.5 kg (7.7 lbs.) |
Dimension | 383 x 192 x 90 mm (15 x 7.6 x 3.5 inch) |
Control | On-Board On/Off Switch |
Mounting | Super Clamp Attachement / SkyPanel PSU Rail Mount |
* RDM Available in Future Firmware |