The 2-1/2" Grip Head (aka gobo head) is without a doubt, the most used piece of grip equipment used by grips for film, Digital, still, and video shoots.
The Junior to Baby Pin Adapter fits into heavy duty aluminum or steel light stands with combo heads or the turtle base of a C-Stand and can be used with other grip accessories as a baby o
With a padded grip surface and a unique design combining one flat and one v-notched jaw, Mafer Clamps are used to attach fixtures and equipment to a variety of irregular surfaces including furnitur
Sandbags are made of 1000 denier Black Textured Nylon with a water resistant polyurethane coating on the inside, triple sewn with a safety strip at the bottom.
The drop ceiling Scissor clamp attaches to all standard drop-ceiling frameworks and has a 3" long 5/8" aluminum baby spud which can be used to attach lights or grip heads too.
Used for a chroma key background. Material has grommets for tieing to frame. Rent the 12x Green Screen. 12'x12' Chroma Green Screen. Size: 12ft. x 12ft.
The Baby Pipe Clamp fastens to pipes with diameters of 0.39 to 2.16". It has a 5/8" mounting stud and a load capacity of 220.46 lb (100 kg). A safety cable is included.
Softens and diffuses direct light. Also introduces a significant amount of ambient bounce. Reduces light output 1.6 f stops. Material has grommets for tieing to frame.
Also known as Baby Nail-On. A steel plate with a Baby (5/8") Pin welded to it and holes drilled in each corner for screwing or nailing to a set wall or studio floor.
48"x48"x1"x1/4" Aluminum Flat Open Frame w/ 5/8" Pin This is a Non collapsible unit for use with 4x4 Rags, gels and diffusion of your choice to control light.
Jaws right at the base of the baby pin for more stable mounting of heavier lamps, etc. Knob and one jaw are removable on this clamp. Same jaws & pads as 2E.
The End Jaw Cardellini Clamp features patented design jaws on one end and baby pin on the other. Slips into tight spaces for mounting lights. Grabs a multitude of shapes.