Call for Availability
800.941.2446
1 - DPA d:dicate MMP-ER Modular Active Rear Cable Black
For use with hanging mics or low-profile table or instrument mics, the MMP-E Modular Active Cable Preamplifier can be combined with any modular capsule in the d:dicate™ Microphones Series.
It features a high quality preamplifier split into a 12 mm housing and a 3-pin XLR connector. These components attach the capsule to a cable at a length of 3 to 30 meters. It is an ultra-transparent preamplifier with active drive for impedance balancing to reject frequency interference.
MMP-ER/ES MODULAR ACTIVE CABLE, XLR (MMP-ER/ES)
Output connector: XLR-3M. Pin 1: shield, Pin 2: signal + phase, Pin 3: - phase
Low-cut frequency, -3 dB: 15 Hz
Noise with shorted input A-weighted: 0.6 µV
Output voltage, RMS: 2.2 V
Output voltage, peak: 3.1 V
Type of electronic circuit: Active
THD@1VRMS, 1kHz: < 0.2 %
Dynamic range: 131 dB
Output impedance: 100 Ω
Minimum load impedance: 2 kΩ
Cable drive capability: 100 m (324 ft)
Output balance principle: Impedance balancing
Common mode rejection ratio (CMRR): > 40 dB
Power supply (for full performance): 48 V Phantom power (± 4 V)
Current consumption: 3.5 mA
Color: Matte black
Weight: 91 g (3.2 oz)
Diameter: 19 mm (0.75 in)
Length: 3 m (9.8 ft)
Temperature range: -40 °C to 45 °C (-40 °F to 113 °F)
Relative humidity (RH): Up to 90 %
DPA d:dicate MMP-ER Modular Active Rear Cable Quick Guide
Download