Call for Availability
800.941.2446
Ultra-compact preamplifier with active drive for impedance balancing. It has a slightly softer character than the other preamps in the d:dicate™ Microphones Series.
You can combine this preamplifier with any modular capsule in the d:dicate™ Microphones Series.
MMP-C COMPACT MICROPHONE PREAMP (MMP-C)
Output connector: XLR-3M. Pin 1: shield, Pin 2: signal + phase, Pin 3: - phase
Low-cut frequency, -3 dB: 15 Hz
Noise with shorted input A-weighted: 0.6 µV
Output voltage, RMS: > 4 V
Output voltage, peak: > 5.6 V
Type of electronic circuit: Active
THD@1VRMS, 1kHz: < 0.2 %
Dynamic range: 136 dB
Output impedance: < 200 ohm
Cable drive capability: 100 m (328 ft)
Output balance principle: Impedance balancing with Active Drive
Common mode rejection ratio (CMRR): > 50 dB
Power supply (for full performance): 48 V Phantom power (± 4 V)
Current consumption: 2.8 mA
Color: Matte black
Weight: 40 g (1.4 oz)
Diameter: 19 mm (0.75 in)
Length: 41 mm (1.6 in)
Temperature range: -40 °C to 45 °C (-40 °F to 113 °F)
Relative humidity (RH): Up to 90 %
DPA d:dicate MMP-C Compact Preamplifier Quick Guide
Download