Call for Availability
800.941.2446
This mic is part of the flexible d:dicate™ Microphones Series. It has a highly-directional supercardioid pickup pattern with a smooth and uniform off-axis frequency response.
Due to its modular nature, the d:dicate™ 4018F Supercardioid Microphone Boom can be combined with different lengths of podium booms – 15, 30 or 45 cm (6, 12 or 18 in). If longer booms are needed for floor stands with visual elegance, our long booms at 75 or 120 cm (30 or 48 in) make a high-quality stage voice mic together with our dedicated accessories.
The microphone capsule
The supercardioid shape is frequency independent, securing an identical sound color around the microphone. The usual rear lobe heard on most supercardioids is minimized on this capsule. This makes it much more isolated without sudden frequency dependent peaks and dips.
A truly flexible range
This mic is part of the flexible d:dicate™ Microphone Series. At any time, and with no tools needed, it is possible to transform the d:dicate™ 4018F Supercardioid Microphone into a new configuration. You can combine it with another d:dicate™ or d:facto™ Microphone Capsule or Preamplifier.
Features
The product offers the following features
Low noise and natural voice
Highly directional for high isolation
Most controlled supercardioid shape
Uniform, frequency independent directionality
Ultimate podium or floor mic
Modular flexibility
DPA Microphones 4018F75 Specifications:
- Directional pattern: Supercardioid
- Principle of operation: Pressure gradient
- Cartridge type: Pre-polarized condenser
- Frequency range: 20 Hz - 20 kHz
- Frequency range, ±2 dB, at 30 cm (11.8"): 40 Hz - 18 kHz
- Sensitivity, nominal, ±2 dB at 1 kHz: 12 mV/Pa; -38.4 dB re. 1 V/Pa
- Equivalent noise level, A-weighted: Typ. 16 dB(A) re. 20 µPa (max. 19 dB(A))
- Equivalent noise level, ITU-R BS.468-4: Typ. 23 dB
- S/N ratio (A-weighted), re. 1 kHz at 1 Pa (94 dB SPL): Typ. 78 dB(A)
- Total harmonic distortion (THD): < 1% up to 137 dB SPL peak
- Dynamic range: Typ. 121 dB
- Max. SPL, peak before clipping: 142 dB
- Output impedance: 100 Ohms
- Minimum load impedance: 2 kOhms
- Cable drive capability: 328ft (100m)
- Output balance principle: Impedance balancing
- Common mode rejection ratio (CMRR): > 40 dB
- Power supply (for full performance): 48 V Phantom power (± 4 V)
- Current consumption: 3.5 mA
- Connector: XLR-3M. Pin 1: shield, Pin 2: signal + phase, Pin 3: - phase
- Color: Matte black
- Microphone diameter: 19mm (0.75")
- Capsule diameter: 19mm (0.75")
- Microphone length:
- Capsule: 23mm (0.9")
- Boom pole: 75cm (approx. 30")
- Maximum output voltage, RMS: 2.2 V
- Polarity: +V at pin 2 for positive sound pressure
- Temperature range: -40°F to 113°F (-40°C to 45°C)
- Relative humidity (RH): Up to 90%
- Matching tolerance (frequency response and sensitivity): ±1 dB
- Phase deviation for kit: < 10