RTS 2 Channel Binaural (Stereo), Programmable Beltpack

MPN: F.01U.118.528

Call for Availability

800.941.2446

Telex BP-325 Dual Channel Binaural Programmable Beltpack Station
Telex 3 Year Limited Warranty

The Telex BP-325 Black Dual Channel Binaural Programmable Beltpack Station is a portable user station for use with RTS Two-Wire intercom systems. This is a binaural (stereo) programmable 2 channel beltpack with PGM-in capability. It is for use with dynamic microphone only. The factory setting is for Dynamic.

Call function that allows the user to send or receive call signals to other devices on the intercom channel, including audible call alert on the listen side
Microprocessor controlled microphone kill detect
Powered externally, via the intercom system power supply on channel one
Headset 4 or 5-pin XLR connection is available

Channel Supplied Power Requirements: 30V DC nominal (standard RTS line), 65 to 85 mA
Storage Temperature: -20 deg. C to 80 deg. C; 0% to 95% humidity, noncondensing
Operating Temperature: 0 deg. C to 50 deg. C; 0% to 95% humidity, noncondensing
Exterior: Polystyrene and polycarbonate mix; gray textured main body
Impedance Across Intercom Line: 10000Ohms typical
Ambient Temperature Range: Operating: 0 deg. C to 50 deg. C
Ambient Temperature Range: Storage: -40 deg. C to 125 deg. C
Noise Contribution to 200Ohms Line: -75dBu
Maximum Input Level: +20dBu
Nominal Input Level: -10 to +8dBu
Frequency Response: 100Hz to 12kHz, +/-3dB
Monaural Dynamic-mic Headset Connector: XLR-4-31 receptacle (J13)
Pin 1: Microphone low
Pin 2: Microphone high
Pin 3: Common
Pin 4: Headphone high
Stereo Dynamic-mic Headset Connector: XLR-5-31 receptacle (J14)
Pin 1: Microphone low
Pin 2: Microphone high
Pin 3: Common
Pin 4: Headphone left high
Pin 5: Headphone right high
Carbon-mic Headset Connector (J1): 1/4", 3-conductor Phone Jack
Carbon-mic Connector (J1) for Headset: Tip: Carbon microphone
Ring: Headphone
Sleeve: Common
Carbon-mic Connector (J1) for Mic Switch: Tip: Remote switch normal-open contact
Ring: No connection
Sleeve: Remote switch common
Intercom Line Input Connector (J11): XLR-3-31 female receptacle
Pin 1: Common
Pin 2: Channel 1 intercom audio and +DC
Pin 3: Channel 2 intercom audio
Aux Connector (J10) for Loop-through: XLR-3-32 male receptacle
Pin 1: Common
Pin 2: Channel 1 intercom audio and +DC
Pin 3: Channel 2 intercom audio
Aux Connector (J10) for Program Input: Pin 1: Common
Pin 2: Program input high
Pin 3: Program input low
Aux Connector(J10) for Remote Mic Switch: Pin 1: Common
Pin 2: +22 to +24V DC
Pin 3: Remote switch normal-open contact
Dimensions (H x W x D): 5 x 3.5 x 1.8" / 127 x 88.9 x 45.72mm
Weight: 13oz / 368.54g