- Selectable Phantom Power: The HMa offers phantom power options at 5, 15, and 48 volts, making it compatible with a variety of microphones
- Wide Tuning Range: With up to 76 MHz tuning range, you can select from a large number of frequencies (up to 3072) in either 100 kHz or 25 kHz steps
- Output Power Options: Choose between 50 mW or 100 mW output power for optimal performance.
- Low-Frequency Roll-Off: Adjust the low-frequency response to suit your audio needs
Call for Availability
800.941.2446
Lectrosonics HMa Wideband Plug on Transmitter Band B1
Lectrosonics HMa Plug on Transmitter,100Mw, 3-Block tuning, Mic Phantom Power, 2 AA, Frequency Band B1 Freq 537.600 - 614.375.
This unique plug-on transmitter design will ideally match any microphone or line level source via a standard XLR connector. Phantom power is selectable at 5, 15 and 48 volts, or can be turned off for use with dynamic microphones and line level signal sources.
The design includes a wide tuning range of up to 76 MHz, with tuning steps in increments of 100 kHz or 25 kHz for up to 3072 frequencies. The tuning range covers three standard 25.6 MHz Lectrosonics frequency blocks. Each of the standard blocks includes 256 different pilot tone frequencies for compatibility with all Digital Hybrid Wireless receivers.
DSP compatibility modes are also included to work with legacy Lectrosonics analog wireless microphone receivers and IFB receivers, as well as some receivers from other manufacturers.
The transmitter is powered by two AA batteries, with status indicated by a multi-color LED. A USB port is provided for firmware updates. An IR (infrared) port is also included to simplify setup with IR enabled receivers.
Accepts microphone or line level signals
Selectable 5, 15, 48 volt phantom power
76 MHz tuning range in 100 kHz or 25 kHz steps for up to 3072 frequencies
Selectable 50/100 mW output power
Adjustable low frequency roll-off
Powered by two AA batteries
USB port for firmware updates
IR (infrared) port for fast setup
Solid machined aluminum housing
This unique plug-on transmitter design will ideally match any microphone or line level source via a standard XLR connector. Phantom power is selectable at 5, 15 and 48 volts, or can be turned off for use with dynamic microphones and line level signal sources.
The design includes a wide tuning range of up to 76 MHz, with tuning steps in increments of 100 kHz or 25 kHz for up to 3072 frequencies. The tuning range covers three standard 25.6 MHz Lectrosonics frequency blocks. Each of the standard blocks includes 256 different pilot tone frequencies for compatibility with all Digital Hybrid Wireless receivers.
DSP compatibility modes are also included to work with legacy Lectrosonics analog wireless microphone receivers and IFB receivers, as well as some receivers from other manufacturers.
Lectrosonics HMa Wideband Plug on Transmitter Manual
Download