Lamphead |
S60-C |
Optical System |
Soft Diffusion Panel |
Light Aperture |
645 x 300 mm / 25.4 x 11.8" |
Beam Angle |
115º (Half Peak Angle) |
Weight |
Manual Version: approx. 13 kg / 29 lbs
Pole Op Version: approx. 14 kg / 31 lbs |
Packed Weight: |
Manual Version: approx. 21 kg / 46 lbs
Pole Op Version: approx. 22 kg / 49 lbs |
Size (H x W x L): |
433 x 133 x 825 mm / 17 x 5.3 x 32.5" |
Packed Size (H x W x L): |
460 x 300 x 856 mm / 18 x 11.8 x 33.7" |
Handling |
Aluminium Yoke, High Strength Tilt Lock
Pole Operation Option (Pan & Tilt) |
Mounting |
28 mm Spigot (Junior Pin) |
Tilt Angle |
+/- 90º |
Lamphead Voltage Input |
48 V DC |
Power Consumption |
420 W Nominal, 450 W Maximum |
Lamphead Power Connection |
Male 3-Pin XLR - 15 Amp (Pin 1: Negative / Pin 2: Positive) |
Battery Connector |
Male 4-Pin XLR - 10 Amp (Pin 1: Negative / Pin 4: Positive) |
Battery DC Voltage Range |
23 to 36 V DC |
Battery Mode Light Output |
50 % of total output |
White Light |
2,800 K to 10,000 K continuously variable correlated color temperature |
Colored Light |
Full RBG+W Color Gamut with Hue and Saturation Control |
Color Temperature Tolerance |
+/-100 K (nominal), +/-1/8 Green-Magenta (nominal) |
Color Rendition |
CRI Average > 95
TLCI Average > 90 |
Green-Magenta Adjustment |
Continuously adjustable (Full Minusgreen to Full Plusgreen) |
Dimming |
0 to 100 % continuous |
Control |
On-Board Controller, 5-Pin DMX In and Through, EtherCon LAN network connectivity, USB-A, Art-Net |
Remote Device Management (RDM*) |
DMX Setup, Hour Counter and Standard RDM Commands |
Software Interface |
Ethernet: DMX Setup, Fixture Status and Firmware Upgrade through PC, Mac USB-A: Software upgrade via flash drive |
Housing Color |
Blue/Silver, Black |
Ambient Temperature Operation |
-20 to +45ºC / -4 to +113ºF |
Protection Class / IP Rating |
III / IP20 |
Estimated LED Lifetime (L70) |
50,000 hours |
Estimated Color Shift Over Liftetime |
+/- 5 % |
Certifications |
CE, CB, ENEC, cNRTLus, FCC, PSE |
|
|
Power Supply Unit |
S60 PSU |
Power Supply Input Range |
110 to 240 V ~, 50/60 Hz |
Power Supply Output Range |
48 V DC |
Power Input Connection |
powerCON TRUE1 (Bare Ends / Schuko / Edison cables available) |
Power Output Connection |
Female 3-Pin XLR - 10 Amp (Pin 1: Negative / Pin 2: Positive) powerCON TRUE1 (mains power through) |
Weight |
3.5 kg / 7.7 lbs |
Dimension |
383 x 191 x 91 mm / 15 x 7.5 x 3.6" |
Control |
On-Board On/Off Switch |
Mounting |
SkyPanel PSU Super Clamp Adapter / Rail Mount Adapter |
Certifications |
CE, CB, ENEC, cNRTLus, PSE |
* RDM Available in Future Firmware |
Note: All specifications are nominal / typical values. |